{"id":1324,"date":"2020-04-02T14:29:16","date_gmt":"2020-04-02T14:29:16","guid":{"rendered":"http:\/\/ultrared.biz\/?page_id=1324"},"modified":"2020-04-07T12:17:02","modified_gmt":"2020-04-07T12:17:02","slug":"3d-printing-tips-tricks-for-face-shield","status":"publish","type":"page","link":"https:\/\/nyh.hfh.temporary.site\/index.php\/3d-printing-tips-tricks-for-face-shield\/","title":{"rendered":"3D Printing Tips & Tricks for Face Shield"},"content":{"rendered":"\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

We got our inspiration from the guys at 3DVerkstan, Erik Cederburg\u00a0 http:\/\/www.youmagine.com\/designs\/26808<\/a><\/p>

We changed the design a little to optimize for stacked printing with an FDM printer, prefereably something that can print with 2 different materials.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Stacked\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Place the models on top of each other. You can use Netfabb or Meshmixer to do this. Leave a gap of 0.6mm (For a 0.4 or 0.8mm Nozzle)<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t

\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Print preview showing 2 different colours for 2 different materials. We used PETG for the main material and PLA for the support. PETG and PLA print well together but don’t bond together, making support removal much easier.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t

\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Using your preferred slicer software (we use Simplify 3D). Make sure your support extruder is printing the dense support layer, and make sure the vertical separation layers are set to zero. This will ensure a lovely print with no drooping and easy support removal.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
<\/div>\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

You can find the files for printing and preparing the face shield HERE<\/a><\/p>

The instructions for assembly can be found HERE<\/a><\/p>

Good Luck!<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Design Considerations<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Option 1 - NIH Approved (DTM Design)<\/h4>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
  • Approved by US National Health Institute.<\/li>
  • Long print (2 hours).<\/li>
  • Not stackable.<\/li>
  • Needs a head band.<\/li>
  • Needs holes to be punched in the PVC sheet.<\/li>
  • Medium Complicated assembly (1 3D printed part and a Headband).<\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t
    \n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t

    Option 2 - Prusa Design<\/h4>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t
    • Faster to print (under 1 hour).<\/li>
    • Stackable.<\/li>
    • Needs a head band.<\/li>
    • Needs holes to be punched in the PVC sheet.<\/li>
    • Medium Complicated assembly (2 3D printed parts and a Headband).<\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
      \n\t\t\t
      \n\t\t\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
      \n\t\t\t\t\t\t
      \n\t\t\t\t\t
      \n\t\t\t
      \n\t\t\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t\t\t
      \n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t

      Option 3 - Thingiverse Design<\/h4>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
      \n\t\t\t\t\t\t
      \n\t\t\t\t\t
      \n\t\t\t
      \n\t\t\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
      \n\t\t\t
      \n\t\t\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t
      • Faster to print (under 1 hour).<\/li>
      • Not Stackable.<\/li>
      • No head band.<\/li>
      • No holes required to be punched (sheet held by a tight fit)<\/li>
      • Difficult assembly (since the sheet fit is so tight, it takes a long time to assemble.<\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
        \n\t\t\t\t\t\t
        \n\t\t\t\t\t
        \n\t\t\t
        \n\t\t\t\t\t\t
        \n\t\t\t\t
        \n\t\t\t\t\t\t\t
        \n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
        \n\t\t\t\t
        \n\t\t\t\t\t

        Option 4 - Verkstan Design (chosen design)<\/h4>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
        \n\t\t\t\t\t\t
        \n\t\t\t\t\t
        \n\t\t\t
        \n\t\t\t\t\t\t
        \n\t\t\t\t
        \n\t\t\t\t\t\t\t\t\t
        • Fastest to print (20 mins).<\/li>
        • Stackable.<\/li>
        • No head band.<\/li>
        • Holes required to be punched.<\/li>
        • Fastest assembly (only 2 parts)<\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
          \n\t\t\t
          \n\t\t\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"

          We got our inspiration from the guys at 3DVerkstan, Erik Cederburg\u00a0 http:\/\/www.youmagine.com\/designs\/26808 We changed the design a little to optimize for stacked printing with an FDM printer, prefereably something that can print with 2 different materials. Place the models on top of each other. You can use Netfabb or Meshmixer to do this. Leave a […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"elementor_header_footer","meta":{"nf_dc_page":"","_monsterinsights_skip_tracking":false,"_monsterinsights_sitenote_active":false,"_monsterinsights_sitenote_note":"","_monsterinsights_sitenote_category":0,"footnotes":"","_wp_rev_ctl_limit":""},"class_list":["post-1324","page","type-page","status-publish","hentry"],"yoast_head":"\n3D Printing Tips & Tricks for Face Shield - Ultra Red Technologies<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/ultrared.biz\/index.php\/3d-printing-tips-tricks-for-face-shield\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"3D Printing Tips & Tricks for Face Shield - Ultra Red Technologies\" \/>\n<meta property=\"og:description\" content=\"We got our inspiration from the guys at 3DVerkstan, Erik Cederburg\u00a0 http:\/\/www.youmagine.com\/designs\/26808 We changed the design a little to optimize for stacked printing with an FDM printer, prefereably something that can print with 2 different materials. Place the models on top of each other. You can use Netfabb or Meshmixer to do this. Leave a […]\" \/>\n<meta property=\"og:url\" content=\"https:\/\/ultrared.biz\/index.php\/3d-printing-tips-tricks-for-face-shield\/\" \/>\n<meta property=\"og:site_name\" content=\"Ultra Red Technologies\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/ultraredtech\/\" \/>\n<meta property=\"article:modified_time\" content=\"2020-04-07T12:17:02+00:00\" \/>\n<meta property=\"og:image\" content=\"http:\/\/ultrared.biz\/wp-content\/uploads\/2020\/04\/Stacked-with-supports-1024x598.png\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data1\" content=\"2 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\/\/ultrared.biz\/index.php\/3d-printing-tips-tricks-for-face-shield\/\",\"url\":\"https:\/\/ultrared.biz\/index.php\/3d-printing-tips-tricks-for-face-shield\/\",\"name\":\"3D Printing Tips & Tricks for Face Shield - Ultra Red Technologies\",\"isPartOf\":{\"@id\":\"https:\/\/ultrared.biz\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/ultrared.biz\/index.php\/3d-printing-tips-tricks-for-face-shield\/#primaryimage\"},\"image\":{\"@id\":\"https:\/\/ultrared.biz\/index.php\/3d-printing-tips-tricks-for-face-shield\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/nyh.hfh.temporary.site\/wp-content\/uploads\/2020\/04\/Stacked-with-supports-1024x598.png\",\"datePublished\":\"2020-04-02T14:29:16+00:00\",\"dateModified\":\"2020-04-07T12:17:02+00:00\",\"breadcrumb\":{\"@id\":\"https:\/\/ultrared.biz\/index.php\/3d-printing-tips-tricks-for-face-shield\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/ultrared.biz\/index.php\/3d-printing-tips-tricks-for-face-shield\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/ultrared.biz\/index.php\/3d-printing-tips-tricks-for-face-shield\/#primaryimage\",\"url\":\"https:\/\/nyh.hfh.temporary.site\/wp-content\/uploads\/2020\/04\/Stacked-with-supports.png\",\"contentUrl\":\"https:\/\/nyh.hfh.temporary.site\/wp-content\/uploads\/2020\/04\/Stacked-with-supports.png\",\"width\":1299,\"height\":758,\"caption\":\"Stacked Pieces with supports\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/ultrared.biz\/index.php\/3d-printing-tips-tricks-for-face-shield\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/ultrared.biz\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"3D Printing Tips & Tricks for Face Shield\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/ultrared.biz\/#website\",\"url\":\"https:\/\/ultrared.biz\/\",\"name\":\"Ultra Red Technologies\",\"description\":\"Discover 3D Printing\",\"publisher\":{\"@id\":\"https:\/\/ultrared.biz\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/ultrared.biz\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\/\/ultrared.biz\/#organization\",\"name\":\"Ultra Red Technologies\",\"url\":\"https:\/\/ultrared.biz\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/ultrared.biz\/#\/schema\/logo\/image\/\",\"url\":\"https:\/\/nyh.hfh.temporary.site\/wp-content\/uploads\/2025\/06\/Logo_Name_Black.png\",\"contentUrl\":\"https:\/\/nyh.hfh.temporary.site\/wp-content\/uploads\/2025\/06\/Logo_Name_Black.png\",\"width\":650,\"height\":200,\"caption\":\"Ultra Red Technologies\"},\"image\":{\"@id\":\"https:\/\/ultrared.biz\/#\/schema\/logo\/image\/\"},\"sameAs\":[\"https:\/\/www.facebook.com\/ultraredtech\/\",\"https:\/\/www.instagram.com\/ultraredtech\/\",\"https:\/\/www.linkedin.com\/company\/18071699\/\",\"https:\/\/www.youtube.com\/channel\/UC919DXrKvnOarv1YkTxv7Hw\"]}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"3D Printing Tips & Tricks for Face Shield - Ultra Red Technologies","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/ultrared.biz\/index.php\/3d-printing-tips-tricks-for-face-shield\/","og_locale":"en_US","og_type":"article","og_title":"3D Printing Tips & Tricks for Face Shield - Ultra Red Technologies","og_description":"We got our inspiration from the guys at 3DVerkstan, Erik Cederburg\u00a0 http:\/\/www.youmagine.com\/designs\/26808 We changed the design a little to optimize for stacked printing with an FDM printer, prefereably something that can print with 2 different materials. Place the models on top of each other. You can use Netfabb or Meshmixer to do this. Leave a […]","og_url":"https:\/\/ultrared.biz\/index.php\/3d-printing-tips-tricks-for-face-shield\/","og_site_name":"Ultra Red Technologies","article_publisher":"https:\/\/www.facebook.com\/ultraredtech\/","article_modified_time":"2020-04-07T12:17:02+00:00","og_image":[{"url":"http:\/\/ultrared.biz\/wp-content\/uploads\/2020\/04\/Stacked-with-supports-1024x598.png","type":"","width":"","height":""}],"twitter_card":"summary_large_image","twitter_misc":{"Est. reading time":"2 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/ultrared.biz\/index.php\/3d-printing-tips-tricks-for-face-shield\/","url":"https:\/\/ultrared.biz\/index.php\/3d-printing-tips-tricks-for-face-shield\/","name":"3D Printing Tips & Tricks for Face Shield - Ultra Red Technologies","isPartOf":{"@id":"https:\/\/ultrared.biz\/#website"},"primaryImageOfPage":{"@id":"https:\/\/ultrared.biz\/index.php\/3d-printing-tips-tricks-for-face-shield\/#primaryimage"},"image":{"@id":"https:\/\/ultrared.biz\/index.php\/3d-printing-tips-tricks-for-face-shield\/#primaryimage"},"thumbnailUrl":"https:\/\/nyh.hfh.temporary.site\/wp-content\/uploads\/2020\/04\/Stacked-with-supports-1024x598.png","datePublished":"2020-04-02T14:29:16+00:00","dateModified":"2020-04-07T12:17:02+00:00","breadcrumb":{"@id":"https:\/\/ultrared.biz\/index.php\/3d-printing-tips-tricks-for-face-shield\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/ultrared.biz\/index.php\/3d-printing-tips-tricks-for-face-shield\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/ultrared.biz\/index.php\/3d-printing-tips-tricks-for-face-shield\/#primaryimage","url":"https:\/\/nyh.hfh.temporary.site\/wp-content\/uploads\/2020\/04\/Stacked-with-supports.png","contentUrl":"https:\/\/nyh.hfh.temporary.site\/wp-content\/uploads\/2020\/04\/Stacked-with-supports.png","width":1299,"height":758,"caption":"Stacked Pieces with supports"},{"@type":"BreadcrumbList","@id":"https:\/\/ultrared.biz\/index.php\/3d-printing-tips-tricks-for-face-shield\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/ultrared.biz\/"},{"@type":"ListItem","position":2,"name":"3D Printing Tips & Tricks for Face Shield"}]},{"@type":"WebSite","@id":"https:\/\/ultrared.biz\/#website","url":"https:\/\/ultrared.biz\/","name":"Ultra Red Technologies","description":"Discover 3D Printing","publisher":{"@id":"https:\/\/ultrared.biz\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/ultrared.biz\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/ultrared.biz\/#organization","name":"Ultra Red Technologies","url":"https:\/\/ultrared.biz\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/ultrared.biz\/#\/schema\/logo\/image\/","url":"https:\/\/nyh.hfh.temporary.site\/wp-content\/uploads\/2025\/06\/Logo_Name_Black.png","contentUrl":"https:\/\/nyh.hfh.temporary.site\/wp-content\/uploads\/2025\/06\/Logo_Name_Black.png","width":650,"height":200,"caption":"Ultra Red Technologies"},"image":{"@id":"https:\/\/ultrared.biz\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/ultraredtech\/","https:\/\/www.instagram.com\/ultraredtech\/","https:\/\/www.linkedin.com\/company\/18071699\/","https:\/\/www.youtube.com\/channel\/UC919DXrKvnOarv1YkTxv7Hw"]}]}},"_links":{"self":[{"href":"https:\/\/nyh.hfh.temporary.site\/index.php\/wp-json\/wp\/v2\/pages\/1324","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/nyh.hfh.temporary.site\/index.php\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/nyh.hfh.temporary.site\/index.php\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/nyh.hfh.temporary.site\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/nyh.hfh.temporary.site\/index.php\/wp-json\/wp\/v2\/comments?post=1324"}],"version-history":[{"count":0,"href":"https:\/\/nyh.hfh.temporary.site\/index.php\/wp-json\/wp\/v2\/pages\/1324\/revisions"}],"wp:attachment":[{"href":"https:\/\/nyh.hfh.temporary.site\/index.php\/wp-json\/wp\/v2\/media?parent=1324"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}